Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Fiat >> 2012 >> 500 Lounge, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Electronic Control Modules (Service Information) Except 500E) >> Module, Transmission Control [EAJ] >> Removal >> Removal

Module, Transmission Control [EAJ]: Removal: Removal

WARNING: This page is about a different car, the 2013 Fiat 500c and 2013 Fiat 500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Bolts & Electronic Control Unit Protection Cover
GC0153553Courtesy of CHRYSLER GROUP, LLC
  1. Remove the bolts (1) and reposition the electronic control unit protection cover (2).
    Fig 2: Electrical Connection, Nuts, Mounting Bracket & Electrohydraulic Selection Gearbox Electronic Control Unit
    GC0153554Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the electrical connection (2) for the electrohydraulic selection gearbox electronic control unit.
  3. Remove the nuts (4) and remove the mounting bracket (3).
  4. Remove the electrohydraulic selection gearbox electronic control unit (1).
scientia non olet · About Mike's Workshop Manuals