Tray, Battery: Installation: Installation

Fig 1: Battery Tray, Connectors, Retainers, Nut & Bolts

Courtesy of CHRYSLER GROUP, LLC

1. Install the battery tray (3) with one nut (5) and two bolts (1). Tighten all three fasteners to 25 N.m (18 ft. lbs.).
2. Engage the engine wire harness connector (2) to the battery tray (3).
3. Engage two engine wire harness retainers (4) to the battery tray (3).
4. Engage two starter wire harness retainers (6) to the battery tray (3).
   Fig 2: PCM Electrical Connectors

   Courtesy of CHRYSLER GROUP, LLC
5. Connect the powertrain control module (PCM) electrical connectors (1 and 2).
   Fig 3: Battery Thermo Cover & Battery

   Courtesy of CHRYSLER GROUP, LLC
6. Install the battery (2). Refer to BATTERY, INSTALLATION .