Summit & Talon Turbo

A new compressor is shipped with refrigerant oil. Drain and measure refrigerant oil from old compressor. Remove refrigerant oil from new compressor equal to difference between amount drained from old compressor and amount shipped in new compressor. If any other major components are replaced, add refrigerant oil as specified. See COMPONENT REFRIGERANT OIL CAPACITIES (SANDEN - SCROLL) table.

COMPONENT REFRIGERANT OIL CAPACITIES (SANDEN - SCROLL)

Component

Ounces

Compressor ⁽¹⁾

Summit

4.4

Talon Turbo

5.7

Condenser

0.5

Evaporator

2.0

Receiver-Drier

0.3

Refrigerant Lines

0.3

⁽¹⁾	If new compressor is shipped without refrigerant oil, add same amount of new refrigerant oil to new compressor that was drained from old compressor.