Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Eagle >> 1995 >> Vision ESi >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Controls - Tests W/Codes - 3.5L) >> Test TC-40B >> EVAP Solenoid Control Circuit

EVAP Solenoid Control Circuit

WARNING: This page is about a different variant/trim than selected.
NOTE: For connector terminal ID, see CONNECTOR IDENTIFICATION. For wiring diagram, see WIRING DIAGRAMS - 3.5L article in ENGINE PERFORMANCE. After each repair, perform TEST VER-2  .

Using an external ohmmeter, check resistance across EVAP solenoid terminals. If resistance is more than 5 ohms, repair open Light Green/Black wire. If resistance is less than 5 ohms, replace EVAP solenoid and fuse No. 20.

scientia non olet · About Mike's Workshop Manuals