Test 7E - Bus Short To Battery
WARNING: This page is about a different car, the 1995 Dodge Stratus and 1995 Chrysler Cirrus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For connector terminal identification, see CONNECTOR IDENTIFICATION
. For wiring diagrams, see article in ENGINE PERFORMANCE:
After each repair, perform TEST VER-1.
- Use scan tool in ohmmeter mode to check resistance of instrument cluster Red connector terminal No. 4 (Black/Light Green wire). If resistance is more than 5 ohms, repair open Black/Light Green wire. If resistance is less than 5 ohms, go to next step.
- Check resistance of Blue instrument cluster connector terminal No. 11 (Black/Orange wire). If resistance is more than 5 ohms, repair open Black/Orange wire. If resistance is less than 5 ohms, replace instrument cluster.