Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Eagle >> 1995 >> Vision ESi >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternator & Regulator >> Self-Diagnostic System >> Entering On-Board Diagnostics >> Scan Tool Diagnostic Mode

Scan Tool Diagnostic Mode

  1. Turn ignition off. Connect scan tool to Data Link Connector (DLC). DLC is located under center of dash, to right of steering column.
  2. Start engine (if possible). With brake applied, move transmission lever through all positions, ending in Park. Turn A/C switch on and off (if equipped).
  3. Turn engine off. Without starting engine again, turn ignition on. Enter CHARGING MENU. At CHARGING MENU, press "2" key (READ TROUBLE CODES). Press ENTER key. After trouble codes are accessed, refer to TEST TC-1A, CHECKING SYSTEM FOR TROUBLE CODES  under SELF-DIAGNOSTIC TESTS.
scientia non olet · About Mike's Workshop Manuals