Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2025 >> Durango R/T Plus >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Integrated Center Stack (ICSM) >> Installation

Module, Integrated Center Stack (ICSM): Installation

  1. Position the Integrated Center Stack (ICS) (1) to the instrument panel. Connect the wire harness connector.
  2. Install the ICS (1) into the instrument panel, hand tap to fully set the retaining clips.
    GC0200391Courtesy of CHRYSLER GROUP, LLC
  3. Install the ICS fasteners (1) and tighten securely.
    GC0200426Courtesy of CHRYSLER GROUP, LLC
  4. Install the passenger side Instrument Panel Center Trim Panel. Refer to PANEL, INSTRUMENT PANEL TRIM, CENTER, INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About Mike's Workshop Manuals