Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2025 >> Durango R/T Plus >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Fuel Pump Control >> Removal

Module, Fuel Pump Control: Removal

  1. Disconnect and isolate the negative battery cable.
  2. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  3. Remove the front fuel tank shield fasteners (1) and remove the shield (2).
    GC0207313Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the fuel pump control module wire harness connector(s) (2).
    GC0207323Courtesy of CHRYSLER GROUP, LLC
  5. Remove the fuel pump control module mounting fasteners (1).
  6. Remove the fuel pump control module(s) from the mounting bracket.
scientia non olet · About Mike's Workshop Manuals