Heating Ventilation And Air Conditioning (HVAC) Module

REMOVAL 

1. Remove the instrument panel cupholder. Refer to CUPHOLDER, INSTRUMENT PANEL, REMOVAL AND INSTALLATION .
2. Disconnect the wire harness connector from the HVAC module.

   Courtesy of CHRYSLER GROUP, LLC

   1 - Wire Harness Connector

   2 - HVAC Module Fastener

   3 - HVAC Module

   4 - HVAC Module Bracket Fasteners

3. Remove the fastener that secures the HVAC module to the HVAC module bracket.
4. If required, remove the fasteners securing the HVAC module bracket to the instrument panel.

INSTALLATION 

Follow the removal procedure in reverse for general reassembly of the components on the vehicle. The steps listed below are calling out specific procedures that should be followed during installation.

• Tighten the fasteners securely.