Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2024 >> Durango SXT Plus, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, HVAC >> Installation

Module, HVAC: Installation

  1. Position the Heating, Ventilation and Air Conditioning (HVAC) module to the HVAC housing.
  2. Install the screws (2) that secure the HVAC module to the HVAC housing and tighten securely.
    GC0184558Courtesy of CHRYSLER GROUP, LLC
  3. Connect the wire harness connectors (1) to the HVAC module.
  4. Install the passenger side instrument panel silencer.
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
  6. Initiate the Actuator Calibration function using a scan tool. Refer to ACTUATOR CALIBRATION FUNCTION .
scientia non olet · About Mike's Workshop Manuals