Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2024 >> Durango R/T Plus, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (6.2L Fuel System) >> Fuel Injection, Gas >> Sensor, TMAP-Intake Manifold >> Removal >> Bank 2

Bank 2

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Disconnect the right side PCV hose (2) from the supercharger and position aside.
    GC0170176Courtesy of CHRYSLER GROUP, LLC
  3. Clean the area around Temperature and Manifold Absolute Pressure (TMAP) sensor (2).
    GC0170244Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the TMAP sensor wire harness connector (1).
  5. Remove screw (3) and the TMAP sensor (2) from supercharger.
scientia non olet · About Mike's Workshop Manuals