Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2023 >> Durango SXT Plus, AWD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension And Wheel Alignment >> Front >> Link, Stabilizer Bar >> Installation

Link, Stabilizer Bar: Installation

NOTE:

Ensure that the stabilizer link nuts are equipped with an encapsulated washer nut assembly upon installation. 

GC0173569Courtesy of CHRYSLER GROUP, LLC
  1. Position the stabilizer link (6) to the vehicle.
  2. Install a NEW  stabilizer bar link upper bolt and tighten to the proper specification. Refer to FRONT, TECHNICAL SPECIFICATIONS .
  3. Install a NEW  stabilizer bar link lower nut (4) and tighten to the proper specification. Refer to FRONT, TECHNICAL SPECIFICATIONS .
  4. Remove the support and lower the vehicle.
scientia non olet · About Mike's Workshop Manuals