Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2021 >> ProMaster City Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Electronic Control Modules (Service Information)) >> Module, Fuel Pump Control >> Installation

Module, Fuel Pump Control: Installation

WARNING: This page is about a different car, the 2020 Dodge Challenger. However, it is still accessible from the selected car via links, so may be relevant.
GC0170087Courtesy of CHRYSLER GROUP, LLC
  1. Position the Fuel Pump Control Module (FPCM) to the right quarter inner panel above and behind the right rear wheel house.
  2. Securely install the fasteners (1) that secure the FPCM to the right quarter inner panel.
  3. Connect the body wire harness connector (2) to the FPCM connector receptacle.
  4. Install the right trunk carpet. Refer to CARPET, INSTALLATION .
  5. Connect the negative battery cable.
scientia non olet · About Mike's Workshop Manuals