Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2021 >> ProMaster City Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Powertrain Control (Pcm) >> Removal And Installation >> Pcm Installation

Pcm Installation

GC0171669Courtesy of CHRYSLER GROUP, LLC
  1. Install the Powertrain Control Module (PCM) (1) to the bracket and tighten the three retaining nuts (2).
  2. Connect and lock the electrical connectors (3) to the PCM.
    GC0172079Courtesy of CHRYSLER GROUP, LLC
  3. Install the engine beauty cover (1).
  4. Connect the negative battery cable.
    NOTE:

    If a new PCM is installed, it must be programed with the original Vehicle Identification Number (VIN) and mileage. If this is not done, a Diagnostic Trouble Code (DTC) may set.

    NOTE:

    If a new PCM is installed. Refer to PCM / TCM PROGRAMMING .

  5. If a new PCM is being installed, use a scan tool and program the new PCM with the original VIN and vehicle mileage.
scientia non olet · About Mike's Workshop Manuals