Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2021 >> Durango SXT Plus, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Cooling System (6.2L)) >> Engine >> Sensor, Coolant Temperature >> Installation

Sensor, Coolant Temperature: Installation

WARNING: This page is about a different variant/trim than selected.
GC0170113Courtesy of CHRYSLER GROUP, LLC
  1. Apply MOPAR® thread sealant with PFTE to the Engine Coolant Temperature (ECT) sensor threads.
  2. Install the ECT sensor (1) and tighten to the proper torque specification. Refer to TORQUE SPECIFICATIONS  .
  3. Connect the ECT sensor wire harness connector (2).
  4. Install the air cleaner body. Refer to INSTALLATION .
  5. Fill the cooling system. Refer to COOLANT SYSTEM AIR EVACUATION  .
  6. Connect the negative battery cable.
scientia non olet · About Mike's Workshop Manuals