Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2021 >> Durango SXT Plus, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Power Windows (Service Information)) >> Motor, Window Regulator >> Installation

Motor, Window Regulator: Installation

WARNING: This page is about a different car, the 2021 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
GC0144826Courtesy of CHRYSLER GROUP, LLC
NOTE:

The power window motor may need to actuated momentarily to line up the gear in the drive assembly with the regulator.

  1. Connect the power window motor wire harness connector (3).
  2. Position the power window motor and gear assembly (1) on the carrier plate, aligning the drive gear with the regulator.
  3. If necessary, temporarily connect the window switch assembly and battery to actuate the motor.
  4. Install and tighten the fasteners (2) that secure the power window motor and gear assembly to the carrier plate.
  5. Install the door interior trim panel. Refer to PANEL, DOOR TRIM, INSTALLATION . for the appropriate procedure. Refer to PANEL, REAR DOOR TRIM, INSTALLATION .
  6. Connect the negative battery cable.
  7. Perform the Clear/Relearn procedure. Refer to DOOR MODULE LEARN PROCEDURES .
scientia non olet · About Mike's Workshop Manuals