Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2021 >> Durango SXT Plus, AWD >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> 3.6L Engine (Service Information) >> Engine Mounting >> Insulator, Engine Mount, Right >> Installation

Insulator, Engine Mount, Right: Installation

  1. If removed, install the right engine mount bracket to the engine block with four bolts and tighten to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
    GC0173716Courtesy of CHRYSLER GROUP, LLC
  2. Install the right engine mount isolator to the frame with two bolts (1) and tighten to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
    GC0173579Courtesy of CHRYSLER GROUP, LLC
  3. Align the tab on the isolators with the notch in the engine mount brackets and lower the engine so the weight is resting on the isolators.
  4. Install the left and right engine mount nuts (1) and tighten to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
    GC0173740Courtesy of CHRYSLER GROUP, LLC
  5. Install the engine mount heat shield to both the left and right engine mounts, then tighten the bolts (1) to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
  6. Install the upper intake manifold and insulator. Refer to MANIFOLD, INTAKE, INSTALLATION  .
  7. Connect the negative battery.
scientia non olet · About Mike's Workshop Manuals