Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2020 >> ProMaster 1500 >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transmission (Service Information) >> Sensor, Speed, Transfer Shaft >> Removal

Sensor, Speed, Transfer Shaft: Removal

  1. Disconnect and isolate the negative battery cable.
  2. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  3. Remove the left front tire and wheel assembly. Refer to REMOVAL .
    GC0158451Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the transfer shaft speed sensor (1) wire harness connector.
    GC0122779Courtesy of CHRYSLER GROUP, LLC
  5. Remove the bolt at transfer shaft speed sensor (1).
  6. Pull up on transfer shaft speed sensor to remove.
scientia non olet · About Mike's Workshop Manuals