Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2018 >> Charger SXT Plus >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Transmission Control (TCM) >> Removal >> Removal - Nag1

Removal - Nag1

  1. Disconnect the battery negative cable.
  2. Remove driver side under instrument panel silencer pad and courtesy lamp.
  3. Remove driver side knee blocker.
    GC0154671Courtesy of CHRYSLER GROUP, LLC
  4. Release the lock tabs on the Transmission Control Module (TCM) (1) wire connectors (2) and pull the wire connectors from the TCM.
    GC0154681Courtesy of CHRYSLER GROUP, LLC
  5. Remove the screws (2) holding the TCM (1) to the instrument panel support beam.
  6. Separate the TCM (1) from the instrument panel.
scientia non olet · About Mike's Workshop Manuals