Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2018 >> Charger SXT Plus >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Instrument Panel Cluster >> Removal

Module, Instrument Panel Cluster: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the instrument cluster bezel. Refer to BEZEL, INSTRUMENT CLUSTER, REMOVAL .
    GC0170824Courtesy of CHRYSLER GROUP, LLC
  3. Remove the four (1) screws securing the instrument cluster to the instrument panel. The column does not need to be removed to access the screws. Illustration shown with steering column removed for clarity only. 
  4. Tilt the cluster forward, and disconnect the wire harness connector.
scientia non olet · About Mike's Workshop Manuals