Module, Radio Antenna: Installation: Module

Courtesy of CHRYSLER GROUP, LLC

1. Engage the mounting tab of the antenna module (2) into the slotted hole in the upper right C-pillar (1).
2. Install and tighten the screw (3) that secures the antenna module to the C-pillar. Tighten the screw securely.
3. Reconnect the body wire harness connector (4) to the antenna module.
4. Reinstall the trim onto the upper right C-pillar. Refer to PANEL, C-PILLAR TRIM, INSTALLATION .
5. Reconnect the negative cable to the battery. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.