Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2018 >> Charger SXT Plus >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) >> Module, Drivetrain Control (DTCM) >> Installation

Module, Drivetrain Control (DTCM): Installation

GC0095226Courtesy of CHRYSLER GROUP, LLC
  1. Slide the Drive Train Control Module (3) on the mounting stud (6) and over mounting stud (5).
  2. Intstall the mounting nuts (2 and 4). Tighten the nuts to 16 N.m (12 ft. lbs.).
  3. Install the drivers side foot rest. Refer to FOOT REST, FLOOR, FRONT, INSTALLATION .
scientia non olet · About Mike's Workshop Manuals