Insulator, Engine Mount, Front: Installation

WARNING: This page is about a different variant/trim than selected.

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Left side shown, right side similar.

If removed, install the engine mount bracket(s). Tighten bolts (1) to the proper specification. Refer to TORQUE SPECIFICATIONS .

Courtesy of CHRYSLER GROUP, LLC

NOTE:
Left side shown, right side similar.
Install the engine mount(s) (2). Tighten bolts (1) to the proper specification. Refer to TORQUE SPECIFICATIONS .
Remove support and lower the vehicle.

Courtesy of CHRYSLER GROUP, LLC
Using the Engine Lift Fixture (special tool #8984B, Fixture, Engine Lifting) (1), Engine Lift Adapter (special tool #8984-UPD, Adapter, Engine Lift) (2) and the Engine Support Fixture (special tool #8534C, Fixture, Driveline Support) (3), lower the engine until the engine mounts are seated on the engine cradle.
Remove the Engine Lift Fixture (special tool #8984B, Fixture, Engine Lifting) (1), Engine Lift Adapter (special tool #8984-UPD, Adapter, Engine Lift) (2) and the Engine Support Fixture (special tool #8534C, Fixture, Driveline Support) (3).

Courtesy of CHRYSLER GROUP, LLC

NOTE:
Left side shown, right side similar.
Install both left/right engine mount to cradle bolts (2) and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS .
Install both left/right engine mount heat shields (4). Tighten nuts (3) to the proper specification. Refer to TORQUE SPECIFICATIONS .

Courtesy of CHRYSLER GROUP, LLC
Raise and support the vehicle.
Tighten the generator support bracket (3). Tighten fasteners (1, 2) to the proper specification. Refer to TORQUE SPECIFICATIONS .

Courtesy of CHRYSLER GROUP, LLC
Install the belly pan and the retainers (1).
Remove support and lower the vehicle.
Install the engine oil dipstick tube and securely tighten nut.
Install the Variable Valve Timing Solenoid. Refer to SOLENOID, VARIABLE VALVE TIMING (VVTS), EXHAUST, INSTALLATION .
Connect the negative battery cable.