Module, Instrument Panel Cluster: Removal

1. Disconnect and isolate the battery negative cable.
2. Remove the instrument cluster bezel. Refer to BEZEL, INSTRUMENT CLUSTER, REMOVAL .

   Courtesy of CHRYSLER GROUP, LLC

3. Remove the four (2) screws securing the instrument cluster (1) to the instrument panel.
4. Tilt the cluster forward, and disconnect the electrical connector.

CLUSTER LENS AND MASK 

1. Remove the IPC.
2. Working around the perimeter of the IPC, release the clips that secure the instrument cluster mask and lens unit to the housing.
3. Remove the mask and lens.