Module, Electronic Shift (ESM): Installation

Courtesy of CHRYSLER GROUP, LLC

1. Position the shifter assembly in place and connect the shifter wire harness connector (1).

   Courtesy of CHRYSLER GROUP, LLC

2. Install the shifter bolts (1) and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .

   Courtesy of CHRYSLER GROUP, LLC

3. Install the shifter bezel panel (1).

   Courtesy of CHRYSLER GROUP, LLC

4. Install the shifter knob (2) and bezel (1).
5. Install the shifter knob screw (4).
6. Connect the shifter wire harness connector (3).