Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2018 >> Challenger SXT Plus >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Drivetrain Control (DTCM) >> Removal

Module, Drivetrain Control (DTCM): Removal

  1. Remove the driver side floor cowl trim. Refer to PANEL, COWL TRIM, REMOVAL .
  2. Roll back the driver side carpet for access to the foot rest.
    GC0184109Courtesy of CHRYSLER GROUP, LLC
  3. Remove the foot rest nut (1) then lift up and slide rearward to release top tab. Disconnect wire harness connector and remove the foot rest (2).
    GC0095226Courtesy of CHRYSLER GROUP, LLC
  4. Loosen the mounting nut (2) from mounting stud (6), remove mounting nut (4) from mounting stud (5).
  5. Slide the Drivetrain Control Module (DTCM) from mounting stud (6) and remove from drivers side foot rest (3).
scientia non olet · About Mike's Workshop Manuals