Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2017 >> Journey GT, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Sensor, Coolant Temperature >> Installation >> 2.0L Diesel

2.0L Diesel

GC0159853Courtesy of CHRYSLER GROUP, LLC
  1. Apply MOPAR™ thread sealant with PFTE part number 04318034 to sensor threads.
  2. Install the Engine Cooling Temperature (ECT) sensor (2) and tighten to 11 N.m (8 ft. lbs.).
  3. Connect the ECT sensor wire harness connector (1).
    GC0148021Courtesy of CHRYSLER GROUP, LLC
  4. Install the engine cover (1).
  5. Fill the cooling system. Refer to STANDARD PROCEDURE .
  6. Connect the negative battery cable.
scientia non olet · About Mike's Workshop Manuals