Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2017 >> Challenger SXT Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 1783 (Fuel System) >> Fuel Injection, Gas >> Sensor, TMAP-Intake Manifold >> Removal >> Intermediate

Sensor, TMAP-Intake Manifold: Removal: Intermediate

WARNING: This page is about a different car, the 2017 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
GC0170238Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Clean the area around the Temperature and Manifold Absolute Pressure (TMAP) sensor.
  3. Disconnect the TMAP sensor wire harness connector (2).
  4. Remove the screw (1) and the TMAP sensor.
scientia non olet · About Mike's Workshop Manuals