Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2016 >> ProMaster City Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Body Control Module (BCM) - Electrical Diagnostics) >> Diagnosis And Testing >> B1001-55-RKE Fob Key Not Programmed >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2014 RAM ProMaster 3500, 2014 RAM ProMaster 2500, and 2014 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.

TEST FOR INTERMITTENT CONDITION 

NOTE:

If a new RKE Fob has to be programmed, ALL keys used in this vehicle MUST be present.

  1. With the scan tool, record and erase the DTCs.
  2. Be sure the ignition on.
  3. Wait 30 seconds.
  4. With the scan tool, read the active DTCs.

    Does the scan tool display; B1001-55-TRANSPONDER - NOT CONFIGURED?

    Yes 

    • Using the scan tool, program ALL RKE Fobs that are used in this vehicle in accordance with the Service Information.
    • Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE .

    No 

    • Test complete. The condition or conditions that originally set this DTC are not present at this time. The RKE Fob that set this code is not present in the ignition at this time.
    • Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE .
scientia non olet · About Mike's Workshop Manuals