Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2016 >> Durango SXT, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Electronic Control Modules (Service Information)) >> Module, Drivetrain Control >> Installation >> Installation

Module, Drivetrain Control: Installation: Installation

WARNING: This page is about a different car, the 2014 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Drive Train Control Module (DTCM)
GC0145747Courtesy of CHRYSLER GROUP, LLC
  1. Position the Drive Train Control Module (DTCM) (3) in the mounting bracket.
  2. Slide the module into place until the locking tabs are secure.
  3. Connect the body wire harness connector to the module connector receptacle.
  4. Install the cover panel onto the electronic module tub (4).
  5. Connect the negative battery cable, refer to CABLES, BATTERY, INSTALLATION for battery location and cable connection procedure.
scientia non olet · About Mike's Workshop Manuals