Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2016 >> Durango SXT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 (Electronic Control Modules (Service Information)) >> Module, Radio Frequency (RF Hub) >> Removal >> Removal

Module, Radio Frequency (RF Hub): Removal: Removal

WARNING: This page is about a different car, the 2015 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the left rear cargo quarter trim panel to access the RF hub. Refer to PANEL, QUARTER TRIM, REMOVAL .
    Fig 1: RF Hub, Retainers & Connectors
    GC0158360Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the electrical connectors (1).
  4. If equipped, disconnect the remote start antenna connector. (1)
  5. Remove the retainers (2) and remove the RF Hub (3) from the vehicle.