Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2015 >> ProMaster City Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Electronic Control Modules- (Service Information)) >> Module, Powertrain Control >> Standard Procedure >> Obtaining Diagnostic Trouble Codes >> Bulb Check

Bulb Check

WARNING: This page is about a different car, the 2014 RAM ProMaster 3500, 2014 RAM ProMaster 2500, and 2014 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.

Key on: Bulb illuminated until vehicle starts, as long as all once per trip (readiness) monitors completed. If monitors have not  been completed, then: Key on: bulb check for approximately 14 seconds, lamp then flashes (once per second) for approximately 11 seconds, then MIL remains illuminated until vehicle is started.