Sending Unit And Sensor, Fuel Level: Installation: Installation

WARNING: This page is about a different car, the 2014 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Retaining Tabs & Plastic Locking Tab

Courtesy of CHRYSLER GROUP, LLC

Position the fuel level sending unit to the fuel pump module, slide unit on mounting track until the plastic locking tab (3) snaps into position.
Route the fuel level sending unit wires into the retaining tabs (1, 2) on the fuel pump module.

Fig 2: Sending Unit Electrical Connectors
Courtesy of CHRYSLER GROUP, LLC
Connect the fuel level sending unit electrical connectors (1, 2) to the fuel pump module.
Install the main fuel pump module. Refer to MODULE, FUEL PUMP, INSTALLATION .