Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2015 >> Durango R/T, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Heated Seat >> Removal >> Removal

Module, Heated Seat: Removal: Removal

Fig 1: Heated Seat Module, Connector & Tab
GC0082156Courtesy of CHRYSLER GROUP, LLC
CAUTION:

The Heated Seat Module mounting tab can be damaged during module removal and installation. Use care to properly align tab to prevent binding that could result in tab breakage.

  1. Position the driver front seat to the full rearward position.
  2. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  3. Disconnect the wire harness connector (4) from the heated seat module (3).
  4. Unsnap the heated seat module retaining tab (2) from the seat pan (1).
  5. Remove the heated seat module (3) from the vehicle.
scientia non olet · About Mike's Workshop Manuals