Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2014 >> Viper Base >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Occupant Restraint Controller (Orc) - Electrical Diagnostics >> DTC Troubleshooting >> B212D-13-Ignition-Run-Only-Input-Circuit >> Set Condition

Set Condition

This DTC sets when the ORC fails to detect ignition voltage or if there is less than 6 volts on the ignition voltage supply circuit for more than 15 seconds while the battery circuit maintains system operating voltage. In the event the ORC detects voltage has returned to normal operating range for a minimum of five seconds, this DTC will immediately transition to stored status.