Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2014 >> Durango R/T, AWD >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> 5.7L Engine (Service Information) >> Engine Block >> FLEXPLATE >> Installation >> Installation

Engine Block: FLEXPLATE: Installation: Installation

Fig 1: Flexplate Retaining Bolt Removal & Tightening Sequence
GC0088080Courtesy of CHRYSLER GROUP, LLC
  1. Position the flexplate onto the crankshaft and install the retaining bolts hand tight.
  2. Using the sequence shown in illustration, tighten the flexplate retaining bolts to 95 N.m (70 ft. lbs.).
  3. Install the transmission (Refer to appropriate TRANSMISSION AND TRANSFER CASE/AUTOMATIC article).
scientia non olet · About Mike's Workshop Manuals