Forward Facing Camera - Calibration Procedure

The Forward Facing Camera (FFC) Calibration need to be performed when the FFC and/or windshield has been replaced. Perform the following steps:

• Connect the scan tool and start the vehicle.
• Navigate to the "Misc Functions" menu under the FFC and place the camera in "In Plant Mode" with the scan tool.
• The screen will now prompt you to drive the vehicle for calibration. The vehicle needs to be driven at speeds of 65 km/h (40 mph) and in the straightest road condition possible. You need a lane with lines (dashed or solid) on both sides of the vehicle. This averages to roughly ten minutes of drive time, terrain permitting.
• After the camera learns the calibration, the scan tool FFC view will show calibrated.
• Return to the "Misc Functions" menu and exit "In Plant Mode." Service calibration DTCs should be in the stored status at this point.
• Clear those DTCs.