Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2014 >> Challenger Rallye Redline >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Electronic Control Modules (Service Information)) >> Module, Adaptive Cruise Control >> Removal >> Removal

Module, Adaptive Cruise Control: Removal: Removal

WARNING: This page is about a different car, the 2014 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying ACC Module, Connector, Fasteners & Screws
GC0159564Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery cable from the negative battery post.
  2. Raise and support the vehicle.
  3. Remove the wire harness to ACC bracket routing fasteners (2).
  4. Disconnect the electrical harness from the electrical connector (3) of the ACC module assembly (4).
  5. Remove two bolts (1) securing the ACC module assembly bracket to the support cross bracing.
  6. Remove the ACC module assembly with bracket from the vehicle to bench.
  7. Remove the four retainers that secure the ACC module assembly to the ACC bracket.
scientia non olet · About Mike's Workshop Manuals