Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2013 >> Journey Crew, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Electronic Control Modules (Service Information)) >> Module, Hands Free >> Installation >> Installation

Module, Hands Free: Installation: Installation

WARNING: This page is about a different car, the 2012 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The HFM is mounted to the top of the steering column support bracket.

Fig 1: Pedal And Booster Mounting - LHD
GC0082337Courtesy of CHRYSLER GROUP, LLC
  1. Connect the electrical connectors and install the hands free module.
  2. Install the hands free module and mounting fasteners.
  3. Install the brake pedal assembly (1). Refer to PEDAL(S), BRAKE AND/OR ACCELERATOR, INSTALLATION .
    Fig 2: Steering Column Opening Trim Panel
    GC0139141Courtesy of CHRYSLER GROUP, LLC
  4. Install the knee bolster (1). Refer to KNEEBLOCKER, INSTALLATION .
  5. Connect the battery negative cable.
scientia non olet · About Mike's Workshop Manuals