Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2013 >> Durango SXT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 589 (Electronic Control Modules (Service Information)) >> Module, Drivetrain Control >> Installation >> Installation

Module, Drivetrain Control: Installation: Installation

WARNING: This page is about a different car, the 2015 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Drive Train Control Module
GC0095226Courtesy of CHRYSLER GROUP, LLC
  1. Slide the Drive Train Control Module (3) on the mounting stud (6) and over mounting stud (5).
  2. Install the mounting nuts (2 and 4). Tighten the nuts to 16 N.m (12 ft. lbs.).
  3. Install the drivers side foot rest. Refer to FOOT REST, FLOOR, FRONT, INSTALLATION .
scientia non olet · About Mike's Workshop Manuals