Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2013 >> Durango SXT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Electronic Control Modules (Service Information)) >> Module, Active Damping Control >> Removal >> Removal

Module, Active Damping Control: Removal: Removal

WARNING: This page is about a different car, the 2012 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: ADCM & Three Mounting Screws
GC0152157Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the left side inner trunk fasteners and position the carpet aside.
  3. Disconnect the wire harness connectors and remove the three screws (2) from the Adaptive Damping Control Module (ADCM).
  4. Release the integral latches that secure the ADCM (1) to the mounting bracket and slide the module upward to remove from the vehicle.
scientia non olet · About Mike's Workshop Manuals