Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2012 >> Durango SXT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Electronic Control Modules (Service Information)) >> Standard Procedure >> Standard Procedure - SKREEM Programming >> ECM/Skim/WCM Programming

ECM/Skim/WCM Programming

WARNING: This page is about a different car, the 2012 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.

When a ECM and the SKIM are replaced at the same time perform the following steps in order:

  1. Program the new SKIM
  2. Program the new ECM
  3. Replace all ignition keys and program them to the new SKIM.


When an ECM (Bosch) and the SKIM are replaced at the same time perform the following steps in order:

  1. Program the new SKIM
  2. Program the new ECM (Bosch)
  3. Replace all ignition keys and program them to the new SKIM.
scientia non olet · About Mike's Workshop Manuals