Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2012 >> Durango R/T, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Powertrain Control Module (Pcm) - DTCS P0122 To P0868 - 65RFE Automatic Transmission >> Diagnosis And Testing >> P0602-Control Module Programming Error/Not Programmed >> Diagnostic Test

Diagnostic Test

  1. CONTROL MODULE PROGRAMMING ERROR 
    NOTE:

    Controller is programmed with generic software and will not allow the correct vehicle Powertrain management.

    1. With the scan tool.
    2. Record the vehicles controller part number.
    3. Select Use Controller Part Number under the Flash Tab.
    4. Flash the controller with the correct software. Refer to MODULE, POWERTRAIN CONTROL, STANDARD PROCEDURE .

      Verify the controller flashed successfully.

      Test Complete 

scientia non olet · About Mike's Workshop Manuals