Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2012 >> Durango R/T, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Blind Spot >> Removal >> Removal

Module, Blind Spot: Removal: Removal

Fig 1: Blind Spot Module
GC0145733Courtesy of CHRYSLER GROUP, LLC
  1. Position the left front seat to its full forward position.
  2. Disconnect and isolate the negative battery cable, for battery location and disconnect procedure. Refer to CABLES, BATTERY, REMOVAL .
  3. Remove the cover panel from the electronic module tub (2) to access the blind spot module (1).
  4. Disconnect the body wire harness connector (3) from the module connector receptacle (4).
  5. Release integral latches that secures the module to the mounting bracket and slide the module upward.
  6. Remove the module from the vehicle.
scientia non olet · About Mike's Workshop Manuals