2.8L Diesel Engine
WARNING: This page is about a different car, the 2011 Dodge Grand Caravan and 2011 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - CYLINDER HEAD BOLT |
| 2 - GLOW PLUG |
| 3 - COOLANT FITTING |
| 4 - CYLINDER HEAD ALIGNMENT DOWEL |
| 5 - GLOW PLUG HARNESS |
| 6 - CYLINDER LINER |
| 7 - CYLINDER BLOCK |
| 8 - CYLINDER HEAD GASKET |
| 9 - CYLINDER HEAD |
| 10 - ROCKER ARM ASSEMBLIES |
WARNING:
Do not remove or loosen the coolant pressure/vent cap, cylinder block drain plugs, or the draincock when the system is hot and under pressure because serious burns from the coolant can occur.
- Disconnect negative battery cable.
- Drain the cooling system. Refer to STANDARD PROCEDURE .
- Disconnect coolant temperature sensor electrical connector.
- Remove coolant temperature sensor (3) from cylinder head.