Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2011 >> Durango Express, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (5.7L Engine (Service Information)) >> Engine Block >> FLEXPLATE >> Installation >> Installation

Engine Block: FLEXPLATE: Installation: Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: Flexplate Retaining Bolt Removal & Tightening Sequence
GC0088080Courtesy of CHRYSLER LLC
  1. Position the flexplate onto the crankshaft and install the retaining bolts hand tight.
  2. Using the sequence shown in illustration, tighten the flexplate retaining bolts to 95 N.m (70 ft. lbs.).
  3. Install the transmission. Refer to INSTALLATION .
scientia non olet · About Mike's Workshop Manuals