Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Dodge and Ram >> 2010 >> Caliber Express >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> SENSOR, Knock >> Removal >> Right Side Knock Sensor

Right Side Knock Sensor

  1. Remove the mixing chamber.
    Fig 1: Intake Manifold Support Bracket & Bolts
    GC0137955Courtesy of CHRYSLER LLC
  2. Remove bolts (1) and the intake manifold support bracket (2).
    Fig 2: Identifying Right Knock Sensor & Bolt
    GC0138481Courtesy of CHRYSLER LLC
    NOTE: Coolant manifold removed for clarity.
  3. Remove bolt (3) and the right knock sensor (4).
scientia non olet · About Mike's Workshop Manuals