DTC 0008: PRNDL Control Circuit Performance: Notes
For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .
- When Monitored:
Continuously with the ignition on.
- Set Condition:
The DTC will set if the ESM detects an open for 10 seconds.
| Possible Causes |
|---|
| FUSE 7 (10A) |
| (827) RELAY FUSED OUTPUT CIRCUIT OPEN OR HIGH RESISTANCE |
| (2486) FUSED IGNITION CIRCUIT OPEN OR HIGH RESISTANCE |
| (893) GROUND CIRCUIT OPEN OR HIGH RESISTANCE |
| (U815) TERM.58 CIRCUIT OPEN OR HIGH RESISTANCE |
| SHIFTER LEVER ASSEMBLY (ESM) |
Always perform the NAG1 Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to DTC-Based Diagnostics/MODULE, Transmission Control (TCM) - Standard Procedure .