9012-Driver Seat Belt Switch Short To Ground: Notes

Courtesy of CHRYSLER LLC

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

• When Monitored: 

  While the ignition on and the Occupant Classification Module (ORC) configured for a Driver Seat Belt Switch, the Occupant Restraint Controller (ORC) checks the switch input current ranges.

• Set Condition: 

  If the ORC detects that there a short to ground on the passenger seat belt buckle switch circuits.

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. See  DTC-Based Diagnostics/CONTROLLER, Occupant Restraint (ORC) - Standard Procedure