Diagnostic Test
- ACTIVE DTC NOTE: Diagnose all CAN B and C communication DTCs before continuing.NOTE: Check for DTC(s) that may have set in the EIS(CGW) Module and diagnose before continuing. Ensure the Ignition key has been learned into the EIS(CGW) Module
- Ignition on, engine not running.
- With a scan tool, view DTCs.
Is the status Active for this DTC?
Yes
- Replace the EIS(CGW) MODULE in accordance with the Service Information.
No
- Refer to the INTERMITTENT CONDITION Diagnostic Procedure. See DTC-Based Diagnostics/MODULE, Engine Control (ECM) - Standard Procedure